SkyPanel is a compact, ultra-bright and high-quality LED soft light that sets a new standard for the industry. With a design focused on form, color, beam field and output, SkyPanel represents the culmination of more than a decade of research and development of LED technology at ARRI.

Incorporating features of ARRI’s successful L-Series LED Fresnels,
SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest.
Like the L-Series, SkyPanel ‘C’ (Color) versions are fully tuneable; correlated color temperature
 is adjustable between 2,800 K and 10,000 K, with excellent color rendition over the entire range.
Full plus and minus green correction can be achieved with the simple turn of a knob,
 and in addition to CCT control, vivid color selection and saturation adjustment is also possible. 

Specifications

Lamphead

Optical System Soft Diffusion Panel

Light Aperture 355 x 300 mm / (14 x 11.8 inches)

Beam Angle 115º (Half Peak Angle)

Weight Manual Version: 7.4 kg (16.3 lbs)

Pole Op Version: 9.0 kg (20.0 lbs)

Handling Aluminum Yoke, High Strength Tilt Lock, Pole Operation Option (Pan & Tilt)

Mounting 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)

Tilt Angle +/- 90°

Lamphead Voltage Input 48 V DC

Power Consumption 200 W Nominal, 220 W Maximum

Lamphead Power Connection Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive)

Battery Connector Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)

Battery DC Voltage Range 23 - 36 V DC

Battery Mode Light Output 100% of Total Output

White Light 2,800K - 10,000K Continuously Variable Correlated Color Temperature

Colored Light Full RBG+W Color Gamut with Hue and Saturation Control

Color Temperature Tolerance +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)

Color Rendition CRI Average > 95

TLCI Average > 91

Green-Magenta Adjustment Continuously Adjustable (Full Minusgreen to Full Plusgreen)

Dimming 0 - 100% Continuous

Control On-Board Controller, 5-Pin DMX In and Through,

EtherCon LAN Network Connectivity, USB-A

Remote Device Management

(RDM*) DMX Setup, Hour Counter and Standard RDM Commands

Software Interface Ethernet: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac

USB-A: Software upgrade via flash drive

Housing Color Blue/Silver, Black

Ambient Temperature Operation -20 to +45º C (-4 to +113º F)

Protection Class IP 20

Estimated LED Lifetime (L70) 50,000 hours

Estimated Color Shift Over

Lifetime < 200 K

Certifications CE, FCC; GS, cNRTL, CB

Power Supply Unit

Power Supply Input Range 110 - 240 V AC, 50/60 Hz

Power Supply Output Range 48 V DC

Power Input Connection powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)

Power Output Connection Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive)

powerCON TRUE1 (mains power through)

Weight 2.1 kg (4.6 lbs)

Dimensions 383 x 116 x 90 mm (15 x 4.6 x 3.5 inch)

Control On-Board On/Off Switch

Mounting Super Clamp Attachment / SkyPanel PSU Rail Mount

All specifications are nominal / typical values.

*RDM Available in future firmware

Die Angaben sind den Datenblättern der Hersteller entnommen. Alle Angaben ohne Gewähr.